Questions


  • ##Installing XtremeCut##

    In Athena how do i switch between different languages like English to French?

    Answer

    With the command "De-Activate Athena objects", all athena objects are de-activated when loaded into another drawing, when importing that drawing back into athena use "Activate Athena objects" and the athena objects can then be modified.

  • Import Wizard wont let me import my CSV File

    In Athena i draw athena objects, when i open them up in a version of Autocad without athena they do not show up correctly, how can i fix this?

    Answer

    With the command "De-Activate Athena objects", all athena objects are de-activated when loaded into another drawing, when importing that drawing back into athena use "Activate Athena objects" and the athena objects can then be modified.

  • What format does the CSV File have to be in

    What year Auto Cad does XtremeCut run on or what year Auto Cad do i need to use XtremeCut?

    Answer

    XtremeCut works on Auto cad Versions 2007, 2008, 2009, 2010, 2011, it also will work if you have AutoCad Architecture and Mechanical Desktop

  • How do i License XtremeCut

    My drawing covers a lot of storage space although it only contains a few objects. Trying to clean up the drawing did not cause anything. What could be the reason?

    Answer

    Perhaps there are Layerfilter in the drawing which increase the file size needlessly. Removing those layer filters ist very awkwardly up to AutoCAD version 2004. Here the Lisp tool "Layerfilter" helps whith enabling you to clean up a drawing completely from all layer filters. The file size of the drawing can be reduced dramatically by cleaning it up this way. The tool can be loaded with the AutoCAD command APPLOAD. Then you enter "DELFIL" or "RemLayerfilters" in the command line and all layer filters in the drawing are deleted.

  • When i install XtremeCut, only the license information appears

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i output my finished Optimization to an automated stop system?

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Installing XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • What Year AutoCad does XtremeFab work on

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Setup Elevations for XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • How does Tagging work

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Setting Up Tagging Standards

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i add Holes, notches and different machinings in XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Release codes are not accepted after installation

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i use any 2D Elevation in XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i add my Fabrication Tables to my Fabrication Sheets

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i output seperate tag drawings for Cover Caps and Pressure Plates?

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Will XtremeFab work with AutoCad Lite?

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • Can i label my Elevations in XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.

  • How do i export my cutlists from XtremeFab

    The tablet does not always work properly with AutoCad 14/ATHENA 14. The cross hairs can be moved, but pick button does not always activate commands from the tablet. What is the reason for this?

    Answer

    Carry out the command "initialise Tablet", which can be found in the pull-down menu under "ATHENA". The tablet is then fully functional again.