Fabricate Any Curtain Wall and Frame

Whether you're tackling a straight run or an inverted wall, the new RHINOFAB 5500 is built to handle it all.

• Single-span curtain wall, inline storefronts and standard punched openings
• Complex curves, leaning panels and inverted segments
• Faceted segments, custom depths and compound miters
• Stepped transitions and tapered jambs

The One Saw That Does It All

The new RHINOFAB All-Saw is the ultimate cutting solution for storefront and curtain wall fabrication—built to handle both simple and highly complex cuts with ease.

Drill, Rout, Countersink and Tap on All Sides

The new Uni-Head CNC System takes Rhino fabrication to a new level — performing drilling, routing, countersinking, and tapping on all four sides.

Whether it’s top and bottom or front and back, the new Uni-Head CNC System delivers precision machining without the need to flip or reposition material between operations.

Angled Fabrication

Go beyond straight-line machining. The RHINOFAB 5500 is engineered for angled drilling, routing, countersinking, and tapping.

The RHINOFAB 5500 makes it possible to perform these operations radially around the length of an extrusion and at angles off 90 degrees from the face—no special setups required.

New Auto Tool Changer

The new RHINOFAB Auto Tool Changer brings next-level efficiency to your fabrication workflow. Designed to automatically switch between drilling, routing, tapping, and countersinking tools.

Keep production moving without manual operation—no operator input required!

Precision Thread Tapping

The new RHINOFAB 5500 performs tapping across a wide range of aluminum profiles.

Whether you're fabricating doors, frames, or curtain wall systems, our CNC-controlled tapping tools deliver consistent thread depths and tight tolerance.

A Complete End Fabrication Solution

The RHINOFAB 5500 performs a full range of end fabrication processes—eliminating secondary setups and manual finishing.

• End Notching
• End Milling
• End Tapping
• Sharp Corners

Layout, drill and cut at one workstation

The Rhino is fed the layout from the elevations that are already drawn, it knows exactly where to drill and cut the parts.

• No more laying out of drilling locations with a tape measure and pencil
• No more drilling templates
• No more moving material from one workstation to another
• Eliminating movement of material cuts down on scratches and other potential damage

Accurate cuts and holes ensure an exact fit every time

The Rhino cuts and drills holes within 0.005" accuracy to ensure your horizontals line up with your verticals exactly as needed.

• Auto sighting ensures deflected pieces are drilled correctly the entire length of the extrusion
• Drill and countersink at required locations

Automatic sorting of material as it comes off the machine

Sorting of cut material has always been a process that takes a lot of time and effort, we automatically sort the materials for your carts to allow the operator to know where the parts go as they process materials through the machine.

• Sort for carts as it comes off the machine
• Sort by elevation
• Sort by tag or mark number

Pre-loaded parts

All the leading manufacturers parts are preloaded into the software that runs the machine. We maintain the database—constantly adding manufacturers and parts, so you aren’t bogged down in managing the updates.

• YKK AP
• EFCO
  
• Kawneer
  
• Tubelite
  
• Oldcastle
  
• U.S. Aluminum

Load your own custom parts and fabrications into the software to go to the machine

Load any part and fabrication into the software to draw elevations or simply send an extrusion to the machine for quick machining. The software is very powerful and flexible for any type of work.

• Load parts fast and easy
• Load fabrications fast and easy

Direct connect software to machine

Design all your frames with parts in our software and send directly to the machine for fabrication.

• Create custom frames, Arched Top, Rake Top, Corners etc…
• Create project estimates
• Glass takeoffs
• Bill of Materials
• Perform alternate bids (switch from one manufacturer to another for pricing)
• Export to CAD

Turn-key installation and setup

The Rhino installs in 3 days by our highly trained staff. Once the machine is setup, we run a project at your location and train your staff in its operation. By the time we leave, you will be running projects daily with the machine.

• Installation and training done by highly trained staff
• Setup and running in 3 days
• Software training is done prior to machine installation
• Ongoing software training provided
• No CNC experience required to operate the machine
• Easy and fast to train new employees to operate the machine

Made In USA

Our equipment and software is made right here in the USA with pride. Getting parts for the machine or support for the software is very quick and easy

• Made in Arizona
• Supported in Arizona